At PGW Solutions, our mission is to provide innovative and sustainable solutions that help businesses reduce their carbon footprint and improve their bottom line.
PARKER BOILER CO
Throughout the United States & around the world Parker boilers are dependably furnishing steam and hot water for almost every type of service. Choose from Gas, Oil or Combination Gas/Oil firing models. Low NOx is available on all models. (Most models are UL or ETL Listed.) Our Core Values are Superior Quality, Safety, Reliability, Low cost Operation & Maintenance that has established our continued growth and success. | Throughout the United States and around the world, Parker boilers are dependably furnishing steam and hot water for almost every type of service. If maintenance costs are high or your present boiler is the cause of expensive shutdowns, now is the time to contact your Parker Boiler representative. Let them prove to you how a truly superior boiler can cut your steam or hot water generating costs. For all Parker Boiler offers, you will be pleasantly surprised at the low initial costs. Choose from Gas, Oil or Combination Gas/Oil firing models. Low NOx is available on all models. (Most models are UL or ETL Listed.). | Throughout the United States & around the world Parker boilers are dependably furnishing steam and hot water for almost every type of service. Choose from Gas, Oil or Combination Gas/Oil firing models. Low NOx is available on all models. (Most models are UL or ETL Listed.) Our Core Values are | The Parker Boiler Co. was founded in 1919 and is a world-renowned manufacturer of steam boilers from 1.5 H.P. to 150 H.P. with pressures to 250 PSI capable of delivering dry steam in under 10 minutes. We manufacture direct-fired hot water boilers (available as gas, oil, propane, or combination-fired) ranging from 300,000 to 6,800,000 BTU, with operating temperatures to 400°F degrees and pressures to 300 PSI. Our indirect-fired water heaters (available as gas or propane-fired) range from 300,000 to 3,000,000 BTU input, with operating temperatures to 190°F degrees and pressures to 150 PSI.
Northwest Pump
Northwest Pump provides engineered fluid handling and process solutions for critical operations. From design and equipment supply to installation, maintenance, and managed services, we help customers improve reliability, safety, and performance across their systems. | Our Industrial Division started with tank farms and mission-critical fueling systems for aviation and marine fuel transfer. Today, we offer major brands of Industrial Equipment and Services for air compressors and pumps, for almost any application on the West Coast. From food and beverage processing, mining and manufacturing, to sewage and chemicals, if it can be pumped, we have the pump to do it. We also provide equipment for compressed air, natural gas, nitrogen generation, and pneumatic conveying. Our knowledge of the industry and trusting relationships with our vendors have given us an edge over our competitors.
McWane Plumbing Group
Leading manufacturer of cast iron soil pipe, fittings, and couplings
JHI Engineering
JHI Engineering is a full-service consulting firm offering process, civil, structural, mechanical, piping, electrical, and instrumentation engineering. Our team of dedicated professionals work together to bring engineering solutions to our clients in heavy industry, manufacturing, and material handling sectors taking projects anywhere from “concept” to “ready-for-construction”.
Horn’s Backflow & Plumbing Service, Inc.
Horn’s Backflow is a family-owned and operated commercial plumbing company in business for almost 20 years. Veteran owned and founded, our family strives to build long-lasting relationships with our clients.
GF Piping Systems
GF Piping Systems is the global expert for the safe and reliable transportation of water, chemicals and gases. The company specializes in plastic piping systems that include a full range of plastic pipe, fittings, valves, actuators, fusion machines, secondary containment, and sensors and instrumentation for industrial process control system solutions. A full range of services including engineering support, fabrication and custom products provides support for all project phases. GF Piping Systems is active in 34 countries and operates over 30 production locations around the world. The new COOL-FIT® PE Plus pre-insulated polyethylene piping system from GF Piping Systems, the next evolution of the COOL-FIT product line, offers a technological leap in process cooling. The new system builds on the excellent performance of its predecessor by providing even higher thermal efficiency, significantly reduced maintenance and operational costs, and faster installation time. The system is ideal for food and beverage production, pharmaceutical production, refrigerated storage facilities, data centers, dairies, fruit and vegetable processors, slaughterhouses, breweries and supermarkets. COOL-FIT PE Plus includes a complete range of pre-insulated pipe, fittings, valves and hoses that efficiently convey brine, glycol, ethanol, and cooled water in temperatures from 58°F to 140°F (60°C to -50°C). All surfaces are sealed and vapor tight and 100% UV-resistant. The system is 100% maintenance-free and will not corrode over time. These characteristics reduce expensive operation interruptions and maintenance. COOL-FIT PE Plus offers up to 25% more energy efficiency than competitive systems. This is accomplished with low heat conductivity from its plastic construction and its robust foam insulation. The smooth interior surface of the medium pipe prevents deposit build-ups to ensure reliability and eliminate pressure loss. Insulation on both fittings and pipe are bonded together, preventing condensation build-up between the two. The COOL-FIT PE Plus system has both insulation foam and an outer jacket manufactured at the factory, which eliminates traditional post-insulation work at the construction site and significantly reduces installation time. Further installation ease is accomplished by the fact that it weighs just a fraction of metal solutions, allowing roof mounting in locations often problematic for other systems. The number of hangers and supports needed is also minimized. Use of electrofusion joining technology is fast, simple and user-friendly and eliminates the need for solvent cement or VOC approvals. | GF Piping Systems is active in 34 countries and operates over 30 production locations around the world. The COOL-FIT® PE Plus pre-insulated polyethylene piping system from GF Piping Systems, the next evolution of the COOL-FIT product line, offers a technological leap in process cooling. The new system builds on the excellent performance of its predecessor by providing even higher thermal efficiency, significantly reduced maintenance and operational costs, and faster installation time. The system is ideal for food and beverage production, pharmaceutical production, refrigerated storage facilities, data centers, dairies, fruit and vegetable processors, slaughterhouses, breweries and supermarkets. | GF Piping Systems is part of Switzerland-based Georg Fischer Ltd.’s North American Piping Systems business unit. The company is a leading supplier of piping systems and instrumentation for the safe and reliable transport of liquids for industrial process control. Its thermoplastic systems feature non-corroding, energy-efficient, maintenance-free performance. Industries like food and beverage, cold storage, semiconductor, chemical processing and many others have found thermoplastics to be an excellent alternative to the frequent replacement costs of metal and stainless-steel piping, which corrode and scale over time, and are unwieldy in overhead installations. COOL-FIT® PE Plus is a complete pre-insulated plastic piping system ideally suited for glycol, chilled water and brine. COOL-FIT® PE Plus handles fluid temperatures as low as 58°F and will not corrode inside or out. It is UV resistant, lightweight, 100% water and vapor tight and features maintenance-free operation with a life span of 25+ years. | GF Piping Systems is part of Switzerland-based Georg Fischer Ltd.âs North American Piping Systems business unit. The company is a leading supplier of piping systems and instrumentation for the safe and reliable transport of liquids for industrial process control. Its thermoplastic systems feature non-corroding, energy-efficient, maintenance-free performance. Industries like food and beverage, cold storage, semiconductor, chemical processing and many others have found thermoplastics to be an excellent alternative to the frequent replacement costs of metal and stainless-steel piping, which corrode and scale over time, and are unwieldy in overhead installations. COOL-FIT® PE Plus is a complete pre-insulated plastic piping system ideally suited for glycol, chilled water and brine. COOL-FIT® PE Plus handles fluid temperatures as low as Â58°F and will not corrode inside or out. It is UV resistant, lightweight, 100% water and vapor tight and features maintenance-free operation with a life span of 25+ years. | We are committed to enabling the safe and sustainable transport of water, gas, and chemicals at sea that are compliant with the latest regulations. Our teams develop application-oriented thermoplastic piping solutions for essential- and non-essential applications that enable fast and easy installation, profitable operations, and environmental benefits. We support our customers in implementing sustainable, future-oriented, and well-designed piping concepts with state-of-the-art planning techniques to optimize the economic efficiency of processes.
FLW Inc.
FLW, Inc. is a Southern California based, family-owned company specializing in industrial measurement, control and calibration products. We represent or distribute over 50 lines and provide service, repair and calibration. Founded in 1971, we focus on delivering practical solutions, supported by ISO 9000 certification and ISO/IEC 17025 accreditation. | FLW, Inc., a private, family owned company, specializes in the sales of industrial physical measurement, control and calibration product. We carry over 50 top product lines as either a manufacturer’s representative or distributor. Additionally, we also service and calibrate the majority of the products we sell as well as providing calibration services for a wide variety of instrumentation.