Micro Dimple Process to reduce clogging, and improve surface sliding and clean-ability. Industries include Food, Pharmaceutical, Cosmetics production lines. It’s not a coating, it is a surface treatment applied to Chutes, Hoppers, Guides, Sieves, Magnets and more.
Wohler USA, Inc.
We are a technically oriented, family owned company operating on an international basis. We develop, produce and market innovative measuring, inspection and cleaning equipment for building services. We place the highest priority on ensuring our products are tailored to the requirements of our customers.
WITT Gas Controls
WITT Gas supplies advanced technologies for precise gas analysis, leak detection, and gas mixing, developed for food and beverage production environments. | WITT Gas Controls provides modified atmosphere packaging (MAP) solutions. As gases are essential in all MAP applications, their control and economical usage is paramount. WITT offers gas mixers, gas analyzers and leak-detection systems to help guarantee the quality and safety of food products and to optimize the packaging process.
Wind River Environmental
Headquartered in Massachusetts, Wind River Environmental is a leading “super-regional” environmental services company. Wind River and its affiliates service and maintain a broad array of non-hazardous liquid waste systems, including grease traps, food waste, septic tanks and related waste systems for a wide range of commercial, residential and municipal customers. The company has a “vertical integration” model that handles all aspects of liquid waste streams ranging from collection and hauling though processing, treatment and disposal. Wind River is the largest and most successful consolidator in this highly fragmented and growing market. | Wind River Environmental provides a full line of wastewater services. Grease Trap Service, Car Wash Pit & Reclaim Tank Service, Emergency Service and Plumbing. | East Coast leader in wastewater services providing a full line of septic and grease trap services.
WINCAN, LLC
WinCan was the original sewer inspection and asset management software when it entered the market 20 years ago. Today, it’s the most trusted sewer software brand worldwide, thanks to continuous innovation and exceptional support. WinCan transforms raw inspection data into the intelligence municipalities and contractors need to make critical maintenance decisions.
Wilco AG
WILCO AG – CCIT and Visual Inspection solutionsWILCO AG is a Swiss solution provider of leading inspection systems serving the pharmaceutical, biotech, diagnostic, medical device and packaging industry worldwide. With more than 50 years of tradition in innovation, we offer our customers customized solutions for leak detection (Container Closure Integrity Testing, CCIT) and visual inspection from lab to production.Tailor-made solutionsWe take the time to understand the needs of our customers. Feasibility studies, process analysis and the method development based on them form the basis for a successful conception and introduction of an inspection system. Our solutions are individually tailored to the specific needs of our customers.To date, there is no “one-size-fits-all” technology for visual inspection and leak testing that can be used for all applications. Different product types such as liquids, powders, lyophilisates and the increasing number of packaging combinations require a rethink in the development of modern inspection systems. This is the path WILCO takes in close cooperation with customers.Broad range of technologyThanks to our extensive portfolio of technologies and methods, we can find the ideal combination for every type of packaging. Continuous optimization and expansion enable unique solutions and guarantee future-proof solutions with maximum functionality.A combination of container closure integrity testing (CCIT) and automated visual inspection can significantly increase your inspection results. The following technologies are available from WILCO individually or in combination:- Automated Visual Inspection Visual inspection using camera technologyVisual inspection using X-ray technologyImage processing- Leak Detection:LFC method®Vacuum and pressure decayHSA (Headspace Gas Analysis)Force sensor technologyMass spectrometry- Process Analytical Technologies (PAT)Near Infrared Spectroscopy (NIRS)Headspace AnalysisContinuous innovation and serviceAs a pioneer in leak testing and visual inspection, we make the lives of people a little safer every day. Our scientific approach is constantly driving us towards new innovations and durable solutions so that we can deliver ever more accurate and reliable measurement results with our inspection solutions.The long-term success of our customers’ testing and inspection processes is the focus of our activities. Therefore we offer a wide range of services to meet individual challenges now and in the future. We support our customers during the entire machine life cycle from consulting to retrofitting.Swiss qualityAs a Swiss family business, we live with passion, joy and enthusiasm for long-term quality and the highest standards. The success of our customers is the focus of our actions. We assume this responsibility personally and reliably. Since 2012, WILCO AG has been part of the Bausch+Ströbel group from Illshofen in Germany.Contact details:WILCO AGRigackerstrasse 115610 Wohlen / SwitzerlandPhone: +41 56 618 43 43Mail: info@wilco.com https://www.wilco.com | WILCO AG â CCIT and Visual Inspection solutionsWILCO AG is a Swiss solution provider of leading inspection systems serving the pharmaceutical, biotech, diagnostic, medical device and packaging industry worldwide. With more than 50 years of tradition in innovation, we offer our customers customized solutions for leak detection (Container Closure Integrity Testing, CCIT) and visual inspectionTailor-made solutionsWe take the time to understand the needs of our customers. Feasibility studies, process analysis and the method development based on them form the basis for a successful conception and introduction of an inspection system. Our solutions are individually tailored to the specific needs of our customers.To date, there is no “one-size-fits-all” technology for visual inspection and leak testing that can be used for all applications. Different product types such as liquids, powders, lyophilisates and the increasing number of packaging combinations require a rethink in the development of modern inspection systems. This is the path WILCO takes in close cooperation with customers.Broad range of technologyThanks to our extensive portfolio of technologies and methods, we can find the ideal combination for every type of packaging. Continuous optimization and expansion enable unique solutions and guarantee future-proof solutions with maximum functionality.A combination of container closure integrity testing (CCIT) and automated visual inspection can significantly increase your inspection results. The following technologies are available from WILCO individually or in combination:- Automated Visual Inspection Visual inspection using camera technologyVisual inspection using X-ray technologyImage processing- Leak DetectionLFC method®Vacuum and pressure decayHSA (Headspace Gas Analysis)Force sensor technologyMass spectrometry- Process Analytical Technologies (PAT)Near Infrared Spectroscopy (NIRS)Automated Media Fill InspectionHeadspace AnalysisContinuous innovation and serviceAs a pioneer in leak testing and visual inspection, we make the lives of people a little safer every day. Our scientific approach is constantly driving us towards new innovations and durable solutions so that we can deliver ever more accurate and reliable measurement results with our inspection solutions.The long-term success of our customers’ testing and inspection processes is the focus of our activities. Therefore we offer a wide range of services to meet individual challenges now and in the future. We support our customers during the entire machine life cycle from consulting to retrofitting.Swiss qualityAs a Swiss family business, we live with passion, joy and enthusiasm for long-term quality and the highest standards. The success of our customers is the focus of our actions. We assume this responsibility personally and reliably. Since 2012, WILCO AG has been part of the Bausch+Ströbel group from Illshofen in Germany.Contact details:WILCO AGRigackerstrasse 115610 Wohlen / SwitzerlandPhone: +41 56 618 43 43Mail: info@wilco.comhttps://www.wilco.com
WESTPAK, Inc
WESTPAK, Inc., is a leading, 3rd-party, independent test laboratory with facilities in San Diego and San Jose, California specializing in package testing and validation for the medical device and pharmaceutical industries. WESTPAK’s expertise includes ISO 11607 guidance, plus cold chain / thermal package validation for life science, and biotechnology. WESTPAK’s laboratories are Certified by the ISTA, and are ISO/IEC 17025-accredited. | WESTPAK, Inc., a third-party, independent test laboratory specializing in product and package testing solutions, supports speed to market with testing expertise, service, and quality. Its California-based facilities total more than 100,000 square feet of testing and administrative space. Testing is accredited to ISO/IEC 17025 by the American Association for Laboratory Accreditation (A2LA); laboratories are certified by the International Safe Transit Association (ISTA). | WESTPAK, Inc., is a leading, independent test laboratory with facilities in San Diego and San Jose, California, specializing in package testing and validation for the medical device and pharmaceutical industries. WESTPAK’s expertise includes ISO 11607 guidance and cold chain / thermal package validation for life science and pharmaceuticals. WESTPAK’s laboratories are Certified by the ISTA; testing is accredited to ISO/IEC 17025. Founded in 1986, WESTPAK has been 100% Employee-Owned since 2017.
Western Technology, Inc.
Western Technology Lights is a leading brand in building lighting solutions for hazardous or difficult-to-access areas. As an experienced Explosion Proof Lighting Fixture Company, we make best-of-breed lighting products that you can rely on for durability, safety, and portability. Some of our hazardous location lighting products include Portable Explosion Proof LED Work Lights and Intrinsically Safe Explosion Proof LED Work Lights. Our products are OSHA-certified and designed for various industries, such as marine, aviation, and petrochemicals. As a respected player in the industry, our Explosion Proof Light Fixture Company manufactures reliable, durable, and safe products. The “TOUGHest” Portable LED Work Lights on the market. As portable luminaries, each light is built to provide “tool-like” reliability. They set the new standard for excellence reducing job site safety risks with easy-to-calculate ROI. Versatile mounting options allow for quick & easy positioning. Western Technology’s Explosion Proof Lights, also known as Hazardous Location Lighting or Intrinsically Safe Lights, are NRTL certified for UL and OSHA Safety Standards compliant. These Explosion Proof Lights are Class 1, Div 1 & 2 or Class 2, Div 1 & 2 – rated for use in hazardous areas. They are designed and manufactured in the USA. Class 1 lights are perfect for confined spaces, where they are typically used for cleaning large vessels or fuel cells, during plant turn-around, marine applications, aviation applications, painting booths, etc. Our products are built for the demanding work spaces of our marine, industrial, and aviation clients.
Werth Inc.
Werth Inc. manufactures high-accuracy optical and multisensor CMMs for shop floor and quality lab applications in all types of manufacturing, like automotive, medical, aerospace, defense, moldmaking, and electronics. Systems range from 2-D manual benchtop gages to large (gantry and bridge-type) 3-D measuring systems with up to six CNC axes utilizing video, laser, touch probe, microprobe sensors, image processing software, and X-ray tomography. | Werth Inc. is the U.S. subsidiary of family-owned Werth Messtechnik GmbH, pioneering coordinate measuring machines for more than 70 years. Headquartered in Old Saybrook, Connecticut, we deliver innovative multi-sensor metrology solutions with sub-micron and nanometer accuracy to North America’s most demanding industries. Our systems uniquely integrate optical, laser, tactile, and X-ray CT sensors on a single platform—eliminating multiple setups and destructive testing. Powered by our universal WinWerth® software, users gain offline programming, real-time GD&T, and advanced automation for faster, audit-proof results. As the world’s first accredited provider for CT-based CMM calibration, Werth sets the standard for traceable measurement. With over 10,000 machines installed globally, our customers reduce inspection time, increase throughput, and minimize scrap. Werth Inc. is your partner in precision—from aerospace and automotive to medical and electronics. | At Werth Inc., we don’t just measure parts—we unlock the future of quality control. As the U.S. subsidiary of family-owned Werth Messtechnik GmbH, founded in 1951 in Germany, we’ve been pioneering coordinate measuring machines (CMMs) for over 70 years. Headquartered in Old Saybrook, Connecticut, since 2003, we serve North America’s most demanding industries with innovative, multi-sensor solutions that deliver sub-micron accuracy without compromise. Our story began with simple profile projectors for the wire industry, evolving into groundbreaking technologies that redefined precision. Today, Werth leads in optical, probe, computed tomography (CT), and hybrid multi-sensor systems. From the 1977 Werth Tastauge optoelectronic sensor to the 2005 TomoScope®—the world’s first CT-specific CMM—we’ve patented over a dozen innovations, including the Werth Zoom (1999) for seamless magnification and the Fiber Probe® (1998) for micro-geometries. Our latest, the Chromatic Focus Zoom CFZ (2020), achieves nanometer precision at unprecedented speeds, while monoblock X-ray tubes cut measurement times by 5x. What sets us apart? True multi-sensor integration on a single platform. Imagine combining image processing, laser scanning, tactile probing, and X-ray CT in one machine—eliminating the need for multiple setups or destructive testing. Our WinWerth® software powers it all: offline programming, real-time GD&T analysis, and tools like ToleranceFit® for contour comparisons or AutoFeature for automatic geometric recognition. Werth wrote the book on traceable CT metrology: in 2003 we developed the first accreditation procedures for multi-sensor CMMs together with Germany’s National Metrology Institute (PTB), and in 2013 our DAkkS laboratory became the world’s first accredited facility for calibrating coordinate measuring machines equipped with X-ray tomography sensors. These milestones guarantee that every Werth system meets the strictest international standards and delivers audit-proof results for ISO 9001, AS9100, IATF 16949, VDI/VDE 2617, and medical device regulations. We serve aerospace leaders needing turbine blade inspections, automotive leaders optimizing engine components, medical device makers verifying implants, and electronics firms perfecting circuit boards. With over 10,000 machines installed globally, our solutions reduce inspection times by up to 70%, boost throughput, and minimize scrap—driving efficiency in high-volume and lights-out production. Werth’s global reach spans subsidiaries in the U.S., UK, France, Italy, Austria, Switzerland, Hungary, and China, backed by 400+ experts (over 50% with technical degrees). As a family business, we invest heavily in R&D, fostering long-term growth with double-digit annual rates. Our commitment extends beyond machines: comprehensive training, on-site service across the lower 48 states, and demo centers ensure seamless adoption. At Werth Inc., we’re more than a supplier—we’re your partner in precision. Whether you’re tackling complex geometries or scaling for Industry 4.0, we help you measure up to tomorrow’s challenges. Discover how our technology can transform your quality processes. Contact us today! | Werth Inc. manufactures high-accuracy optical and multisensor CMMs for shop floor and quality lab applications in all types of manufacturing, like automotive, medical, aerospace, defense, moldmaking, and electronics. Systems range from 2-D manual benchtop gages to large (gantry and bridge-type) 3-D measuring systems with up to six CNC axes utilizing video, laser, touch probe, microprobe sensors, image processing software, and X-ray tomography.